Superior thermal performance through insulation and airtightness

The Kingspan TEK™ Building System is a great starting point to improve the thermal performance of your project; whether you’re targeting basic building regulations or aiming for more of an ‘Eco’ building such as Passivhaus or Nett Zero Carbon Emissions.

Great Insulation – The Kingspan TEK™ Building System comprising 142 mm thick panels yields worst-case, whole-wall and roof U–values of 0.20 W/m².K with no additional insulation. The Kingspan TEK™ Building System comprising 172 mm thick panels yields worst-case, whole-wall and roof U–values of 0.17 W/m².K with no additional insulation.

Extremely low U-values – with an already low starting point, U-values as low as 0.10 W/m².K, can easily be achieved with the addition of an insulated lining on the inside of the Kingspan TEK™ Building System panels – making Passivhaus or Nett Zero a possibility.

Superior Air-tightness – The proprietary jointing techniques used in the Kingspan TEK™ Building System can yield air leakage levels as good as 1m3 /hour/m² at 50 Pa. Overall air-tightness will depend on other architectural details such as windows, doors and service apertures, however, this SIP System achieves targets with minimal taping and sealing, giving your project the best chance of passing air tests for environmental certification.

”“We are aware that a number of our residents in SIPS developments don’t ever turn their heating on while others only have need to use it occasionally. We only provide small electric panel heaters anyway as anything else is over the top. Taking this ‘fabric first’ approach means that we are virtually building passive houses which is good for the future of the whole community. Electricity, oil and especially gas prices over here are considerable so rather than ask the question, “what are we going to heat our homes with?” we prefer to provide homes that, to a large extent, don’t really need heating.”

André Quevâtre, Development Officer – Guernsey Housing Association